Tandy 16-289 User Manual download pdf (Page 5)

5

GETTING STARTED

CHOOSING A LOCATION

Choose a location for the TV where:

• Air flows freely on all sides.

• The power cord is not in the way

of normal traffic.

Note:

Do not plug in the power cord

until you make all other connections.

CONNECTING

ANTENNAS

The supplied rod antenna provides ad-

equate reception in most areas.

To connect the rod antenna, insert it

into the hole on the top of the TV. At-

tach the 300-ohm twin-lead connec-

tors to the two screw terminals on the

supplied adapter.

Then connect the adapter to the TV’s

VHF/UHF (75

Ω

)

terminal.

Connecting an Outdoor

Antenna

For the best reception, we recommend

you use an outdoor antenna.

Note:

Before you connect the TV to an

outdoor antenna, inspect the antenna

and the antenna’s cable. Severely

weathered antennas and antenna ca-

bles can reduce the signal quality.

Your local Radio Shack store sells re-

placement antenna cable (300-ohm

flat wire or 75-ohm coaxial cable) and

a wide variety of outdoor antennas.

The antenna connection you use de-

pends on the type of antenna and ca-

ble you have.

Warnin

g

:

When installing an outdoor

antenna, read and follow all instruc-

tions and cautions that accompany the

antenna.

• If you have a combination VHF/

UHF antenna and the antenna

uses 75-ohm coaxial cable, con-

nect the cable directly to the TV’s

VHF/UHF (75

Ω

)

terminal.

300 Ohm Flat Wire

300-to-75 Ohm Adapter

300-to-75 Ohm Adapter

VHF/UHF (75

Ω

) Terminal

Rod Antenna

VHF/UHF Antenna

VHF/UHF (75

Ω

) Terminal

75 Ohm Coaxial Cable

16-289.fm Page 5 Tuesday, July 20, 1999 10:57 AM

1 2 3 4 5 6 7 8 9 10 ... 27 28

Comments to this Manuals

No comments